MLT系列触摸屏粘度计完美融入触屏技术,用一种时尚现代的高技术来快速、准确、直观地测量粘度,功能强大。5英寸的超大彩色触摸屏可全面、形象地显示各种参数和工作状况。具有测量参数多、显示内容丰富,操作便捷、读数直观、测量精度高的特点,可完全替代同类型进口仪器,引领着国内粘度计的科技新潮流。
Series MLT touch screen viscometer is perfectly integrated with the touch screen technology,and the viscosity can be measured with a fashion, modern and high technology rapidly, accurately and directly. Various parameters and working conditions can be completely and directly displayed on the 5 inch ultra-large colorful touch screen. Various parameters can be measured, displayed and read directly in high accuracy,the instrument can be displayed conveniently, used to replace similar imported products,and it leads the new trend of science and technology of viscometers made in China.
MLT- NDJ T系列触摸屏旋转粘度计主要特点:
① 采用ARM技术,内置Linux系统。操作介面简洁明了,通过测试程序的创建和数据分析,快速而方便地进行粘度测试;
② 粘度测值准确,每个量程都用计算机自动校准,精度高,误差小;
③ 显示内容丰富:除了粘度外,还有温度、剪切速率、剪切应力,测量值占满量程值百分比(图形显示)、量程溢出报警、自动扫描、当前转子转速组合下的zui大测量范围、日期、时间等。并可在已知密度的情况下显示运动粘度,极大地满足用户的不同测量要求;
④ 功能齐全,可定时测量、自建30组测试程序、存取30组测量数据、实时显示粘度曲线、打印数据和曲线等;
⑤ 前置水平仪,水平调节直观方便;
⑥ 可选配温度探头、粘度计专用恒温浴槽、恒温杯、打印机、标准粘度样品(标准硅油)等;
⑦ 中英文操作系统。
T 系列触摸屏旋转粘度计,可测定牛顿型液体的绝对粘度或非牛顿型液体的表观粘度。
T 系列触摸屏旋转粘度计主要特点:广泛应用于需要测量粘度的各种流体和高温熔融下的流体。包括油漆、涂料、化妆品、油墨、纸浆、食品、油品、淀粉、溶剂型胶黏剂、乳胶、生化制品等以及需要高温熔融的、如沥青、石蜡、热熔胶等行业。
机器测试界面部分截图
MLT-NDJ/SNB/LVDV系列是中低粘度样品首选机型(Series MLT-NDJ/SNB/LVDV Medium and Low Viscosity Model)
技术参数Technical Parameters机器测试界面部分截图
MLT-NDJ/SNB/LVDV系列是中低粘度样品首选机型(Series MLT-NDJ/SNB/LVDV Medium and Low Viscosity Model)
5英寸全彩色触摸屏显示 •全新的用户界面 •加强型控制 •实时趋势显示 •支持中英文操作界面 |
5 inch full colorful touch screen •Brand new user's interface •Enhanced control •Real-time trend display •CH/EN operating interface |
显示信息 •粘度 cp •温度 ℃ •运动粘度值 m m/s² •密度 g/cm³ •扭矩 % •剪切率/剪切应力 •转速/转子 |
Displayed information •Viscosity cp •Temperature ℃ •Dynamic viscosity mm/s² •Density g/cm³ •Torque % •Shear rate / shear stress •Rotating speed/rotor |
内置式选项 •定时测量 •可编程QC上下限警报 •自动量程显示 |
Internal options •Timed measuring •Programmable QC upper and lower limit warning •Automatic measuring range displaying |
仪器主要组成: •粘度计主机 •1-4号转子一套或21、27、28、29转子一套(SNB-1A-T) •转子保护架 •乘样筒(SNB-1A-T) •三角底座、立柱各一件 •电源适配器 •仪器铝盒金箱 |
Instrument main components: •Viscometer host machine •Rotor#1-#4,or rotor#21,#27,#28,#29(SNB-1A-T) •Rotor protective frame •Sample cylinder(SNB-1A-T) •Triangular base and column •Power adaptor •Aluminum alloy case |
可选附件: •超低粘度转子(0#转子) •少量样品适配器转子 •恒温循环浴槽 •温度探针 •粘度标准液 •玻璃夹套杯 •软件 •电加热炉 •打印机 |
Optional accessories: •Ultra-low Viscosity rotor (rotor #0) •Trace sample adaptive rotor •Constant temperature circular bath •Temperature probe •Viscosity standard liquid •Glass jacket cup •Software •Electric heater •Printer |
型号 Model | MLT-NDJ5T/MLT-NDJ9T | MLT-NDJ8T/MLT-SNB1T | MLT-DV1TLV | MLT-SNB1A-T |
控制/显示方式 control/Display mode |
5英寸彩色触摸屏 5inch colorful touch screen |
|||
转速 Rotating speed(rpm/min) |
6/12/30/60 | 0.3/0.6/1.5/3/6/12/30/60 |
0.3/0.5/0.6/1/1.5/2/2.5/3/4/ 5/6/10/12/20/30/50/60/100 |
0.5/1/2/5/10/20/50 |
测量范围 mPa.s Measuring range |
1*-100000(10万) | 1*-2000000(200万) | 10*-200000(20万) | |
样品用量Sample consumption | 300ml-400ml | 15ml-25ml | ||
测量误差Measuring error | ±1%(满量程) ≤±1%(full range) | |||
重复误差Repeatability error | ±0.5% | |||
显示剪切应力/剪切速率 Shear stress/ shear rate display |
标配 Standard configuration |
无 N/A |
||
定时功能Timing function | 标配Standard configuration | |||
粘度曲线Viscosity curve | 实时显示粘度曲线 viscosity curve real-time display | |||
运动粘度Dynamic viscosity | 需输入样品的密度后可显示Displayed after the sample density is entered | |||
温度测量功能 Temperature measuring |
标配温度探头接口(需要选配温度探头) Standard temperature probe interface (the optional temperature probe is necessary) |
|||
自动扫描功能 Automatic scanning |
自动扫描并推荐转子与转速的最佳组合 Automatic scanning,optimal combination of rotor and rotating speed recommended |
|||
最大测量范围 Maximum measuring range |
自动显示所选择的转子与转速的组合可测量的粘度范围 The maximum viscosity value range measurable for the chosen combination of rotor and rotating speed can be automatically displayed |
|||
保存测量结果 Measurement result saving |
最多可保存30组数据(含粘度、温度、转子、转速、剪切速率、剪切应力、时间、密度、运动粘度) 30 groups of data can be saved at maximum (Including viscosity,tempperature,rotor,rotating speed,shear rate,shear stress,time,density,dynamic viscosity,etc) |
|||
打印 Printing |
数据、曲线可打印(标配有打印接口,需选购打印机) Data and curve printable(standard printing interface,optional printer) |
|||
恒温部件 Constant temperature |
选件(含各种粘度计专用恒温槽、恒温杯) Optional(Including various viscometer constant temperature bath and constant temperature cup) |
|||
工作电源Power supply | 110V~220V、60Hz/50Hz | |||
外形尺寸External dimensions | 300×300×450(mm) | |||
净重Net weight | 4Kg |